ePropulsion SPIRIT 1.0 Evo, Руководство пользователя

Страница: 15 / 64

13
• To keep electric connectors in good condition, please spray the connectors
about every 3 months with contact spray.
• To store the outboard motor, put the machine in original ePropulsion package
and keep it in a dry and ventilated place without direct sun exposure.
2.2 Battery
The SPIRIT Battery Plus specially designed for SPIRIT 1.0 Evo can only be charged
with an ePropulsion original charger. The battery has a built-in battery management
system which provides cell balancing function, over charging protection, over dis-
charging protection, short-circuit protection, over temperature protection, under tem-
perature protection, over current protection, communication function, etc. Though the
battery has been tested to be reliable and safe during normal operation, it should be
handled with care as safety is critically important. Please adhere to the following in-
structions when using it.
• Do not drop, strike or squash the battery.
• Do not disassemble the battery or conduct unauthorized repair, the battery
disassembly can only be conducted by ePropulsion service.
• Never charge a broken or damaged battery.
• Only charge the battery with an ePropulsion original charger.
• Do not charge the battery near flammable materials like carpet or wood.
• Disconnect charger when not in use.
• Though the battery is IP67 waterproof, it’s suggested not to immerse it in water
or store it in moist environment.
• Keep conductive objects away from the discharging port and charging port to
avoid damage of electronic components.
• Use the port cap to avoid accidental short-circuit.
• Never discharge the battery below 33V. Store the battery in dry environment.
• Charge the battery immediately after full discharge.
• Before long time storage, ensure the battery charge level is 60% around, store
the battery in 15°C ~ 25°C (59°F ~ 77°F) ambient temperature. If the battery level
is larger than 60% for more than ten days without activity, the battery itself will
discharge with a small current around 100mA until it reaches the 60% battery
level.
WARNING