manualshive.com logo in svg

ePropulsion Pod Drive 1.0 Evo, Руководство пользователя, Страница: 38 / 48

Поделиться
Скачать
ePropulsion Pod Drive 1.0 Evo Скачать руководство пользователя страница 38

36

8 Stopping the Pod Drive

It’s recommended to stop the pod drive as the following procedures.

1. 

Return the throttle to zero position.

2. 

Wait until the motor stops, then detach the kill switch.

3. 

Press and hold the “ 

 ” button until the remote control is switched off.

4. 

Turn off the main switch. If the pod drive is not connected to a SPIRIT battery, 
please also turn off the battery by pressing the power button.

The motor will also stop in any below situations.

1. 

Throttle is in zero position.

2. 

Kill switch is not placed in the correct position. 

3. 

The power cable connected to the battery is loose.

4. 

The communication between the remote control and the pod drive is 
interrupted.

5. 

The connection between the battery and the pod drive is disconnected.

6. 

The system is malfunctioning (such as the motor is blocked or the battery 
voltage is too low).

7. 

The main switch is turned off.

Содержание Pod Drive 1.0 Evo

















































Отзывы:

Нет отзывов