ePropulsion Pod Drive 1.0 Evo, Руководство пользователя, Страница: 33 / 48

31
When a wristband is disconnected or an emergency stop is performed, the stop
command of other wristbands will not work until it returns to the normal state.
5.6 Pairing Remote Control with the Pod Drive
Before use please pair remote control with the pod drive. There are two methods to
pair the remote control. Please choose one of the two methods and follow the steps
to build new communication.
Method 1. Pairing without Communication Cable
Step1: Switch off system power and hold the remote control within 0.5m of the com-
munication module/driver module.
Step2: Press and hold the “ ” button to switch on the remote control.
Step3: Ensure the wireless indicator is shown constantly on the home page.
Step4: Press “ ” button and hold 5s to enter the pairing setting page (Figure 5-9).
On this page, you can find the blinking “ ” and “ ” , and a countdown timer
“ ” (60s).
Figure 5-9
Step5: Switch on system power. Wait for them to get paired in seconds.
Step6: After pairing, the LCD panel will display as Figure 5-10 for 5s, then returning to
home page automatically.
Figure 5-10
If pairing fails within 60s, go back to Step3 and try again.