ePropulsion Pod Drive 1.0 Evo, Руководство пользователя, Страница: 32 / 48

30
5.5 Use of Safety Wristband
5.5.1 Pairing safety wristband with remote control
Press the "
^
" and " " buttons and hold for a while to display the safety wristband
icon and “SE”. At this time, approach the safety wristband that needs to be paired,
turn on the safety wristband, and the remote control displays the “SUC”, indicating
successful pairing. Keep in this interface and continue to press "
" to pair the safe-
ty wristband continuously (the maximum number of pairs is 8). After completing the
pairing, press the " " button to return to the main page.
Figure 5-8
5.5.2 Man overboard protection
After the safety wristband and the remote control are paired, when the safety wrist-
band falls into the water and the remote control is on, the remote control display will
flash with a buzzing sound. The safety wristband icon flashes and the number of
safety wristband decreases. At this time, you can continue to operate the machine by
returning the throttle to zero position. The buzzer of the remote control will stop, but
the display continues to flash. If you confirm that you need to cancel the alarm state,
please restart the remote control or the disconnected wristband reconnects.
5.5.3 Emergency stop
After the safety wristband and the remote control are paired, when the remote con-
trol is in operation, short press the button of the safety wristband, the display of the
remote control will flash with a buzzer. At the same time, the safety wristband icon
flashes and the number of safety wristband displayed at the bottom decreases. At
this time, you can continue to operate the machine by returning the throttle to zero
position. The buzzer of the remote control stops, but the display continues to flash. If
you confirm that you need to cancel the alarm state, please restart the remote control
or short press the safety wristband after 5 seconds.