ePropulsion Pod Drive 1.0 Evo, Руководство пользователя, Страница: 21 / 48

19
4 Connecting the Battery
4.1 Connecting a 48V Battery
Before connecting to a battery, make sure the main switch is off, and fix the battery
and communication module/driver on the boat.
1. Connect the power cable of the pod drive to the battery.
2. If use ePropulsion batteries, please connect the battery and pod drive with a
communication cable.
Figure 4-1 Figure 4-2
Avoid battery short-circuit during connection.
Do not short-circuit the main switch with other power supplies. The main switch
should be mounted on the boat, and the back plate of the main switch should
not be removed.
Outboard motor will stop working once the power cable disconnects.
Clockwisely rotate the main switch to power on the battery before use.
Users can also enlarge the battery capacity by connecting multiple batteries in
parallel.
The main switch and power cable are connected by the fixing screws that may
loosen after long-time use. Loosen screws will lead to poor contact, which may
result in overcurrent or other errors. If this problem is discovered, open the back
cover of the switch, and tighten the screws inside.
48V
+ -
48V
+ -
1
2
2
2
2
Communication
Cable
Communication
Cable
Main
Switch
Main
Switch
1
1