EPRAD eCNA-10, Инструкция по установке и эксплуатации

Страница: 69 / 204

© EPRAD Incorporated
Output instructions are normally used to operate relays on the termination board. Instructions that
control the Standard Output flags have an offset timer that allows delayed action of the instruction
in which the action gets scheduled for a later time. Standard Output flags are listed in the following
table.
Standard Output Flags
1 Curtain 22 Masking
2 Slide Projector 23 Digital Projector 1 Power
3 Aux Out 1 24 Digital Projector 1 Video
4 Aux Out 2 25 Digital Projector 2 Power
5 Aux Out 3 26 Digital Projector 2 Video
6 Aux Out 4 27 House Lights
7 Aux Out 5 28 Stage Lights
8 Aux Out 6 29 Zone 3 Lights
9 Aux Out 7 30 Zone 4 Lights
10 Aux Out 8 31 Zone 5 Lights
11 Aux Out 9 32 Zone 6 Lights
12 Aux Out 10 33 Zone 7 Lights
13 Aux Out 11 34 Zone 8 Lights
14 Aux Out 12 35 Zone 9 Lights
15 Aux Out 13 36 Zone 10 Lights
16 Aux Out 14 37 Zone 11 Lights
17 Aux Out 15 38 Zone 12 Lights
18 Aux Out 16 39 Zone 13 Lights
19 Sound 40 Zone 14 Lights
20 Sound Mute 41 Zone 15 Lights
21 Lens 42 Zone 16 Lights
There is one offset timer (42 total) for each of the Standard Outputs. An offset time of 00:00
(mm:ss) disables the timer and the output is executed immediately. An offset time greater than
00:00 (mm:ss) arms the timer and schedules the output to execute when the timer expires.
Since each Standard Output instruction has only one timer, the operation of the offset timer in a
program or macro can be illustrated with the follow examples. The House Lights is a 1-of-5 state
output type:
Up , Down , Mid 1 , Mid 2 and None . Only one state can be active at a time.
Case 1: The Up output flag is activated immediately and the Down output flag is activated after 10
seconds.
1 Lights House Up 00:00
2 Lights House Down 00:10
Case 2: The Up output flag does nothing. The Down output flag is activated immediately. The last
one writes a new timer value.
1 Lights House Up 00:00
2 Lights House Down 00:00
Case 3: The Up output flag does nothing. The Down output flag is activated after 10 seconds. The
last one writes a new timer value.
1 Lights House Up 00:05
2 Lights House Down 00:10
61
eCNA-10 Operation and Installation Manual Version 1.270-00