EPOX EP-3WXA Скачать руководство пользователя страница 46

Страница: 46 / 70

BIOS

EP-3WXA/4/4Y

Page 4-18

HDD Power Down

When enabled and after the set time of system inactivity, the hard disk drive will be

powered down while all other devices remain active.

The choice: Enabled, Disabled.

Soft-Off by PWRBTN

Pressing the power button for more than 4 seconds forces the system to enter the

Soft-Off state when the system has “hung.”

The choice: Delay 4 Sec, Instant-Off.

CPU THRM-Throttling

Select the CPU THRM-Throttling rate.

The choice: 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5%.

Resume by Alarm

This option allows you to have the system turn on at a present time each day or on a

certain day.
The choice: Disabled, Enabled.

** PM Events

PM events are I/O events whose occurrence can prevent the system from entering a

power saving mode or can awaken the system from such a mode. In effect, the

system remains alert for anything which occurs to a device which is configured as

Enabled , even when the system is in a power down mode.

Primary IDE 0

Primary IDE 1

Secondary IDE 0

Secondary IDE 1

FDD, COM, LPT Port

PCI PIRQ[A-D] #

Содержание EP-3WXA







































































Результаты поиска

Содержание EP-3WXA

Отзывы:

EPOX EP-3WXA, Руководство пользователя, Страница: 46 / 70

Результаты поиска

Содержание EP-3WXA

Отзывы: