EPOX EP-3WXA Скачать руководство пользователя страница 43

Страница: 43 / 70

BIOS

EP-3WXA/4/4Y

Page 4-15

UART Mode Select

This filed allows the users to configure what IR mode the 2nd serial port should use.

The default is Normal.

Optional: Normal, IrDA and ASKIR.

Onboard Parallel port

This field allows the user to configure the LPT port.

The default is 378H / IRQ7.

378H: Enable Onboard LPT port and address is 378H and IRQ7.

278H: Enable Onboard LPT port and address is 278H and IRQ5.

3BCH: Enable Onboard LPT port and address is 3BCH and IRQ7.

Disabled: Disable Onboard LPT port.

Onboard Parallel Mode

This field allows the user to select the parallel port mode.

The default is ECP+EPP.

Normal: Standard mode. IBM PC/AT Compatible bidirectional parallel port.

EPP: Enhanced Parallel Port mode.

ECP: Extended Capabilities Port mode.

EPP+ECP: ECP Mode & EPP Mode.

ECP Mode USE DMA

This field allows the user to select DMA1 or DMA3 for the ECP mode.

The default is DMA3.

DMA1:

This field selects the routing of DMA1 for the ECP mode.

DMA3:

This field selects the routing of DMA3 for the ECP mode.

Game Port Address

Select an address for the Game port.
The choice: 201, 209, Disabled.

Mida Port Address

Select an address for the Mida port.
The choice: 300, 330, Disabled.

Midi Port IRQ

Select an interrupt for the Mida port.
The choice: 5, 7.

Содержание EP-3WXA







































































Результаты поиска

Содержание EP-3WXA

Отзывы:

EPOX EP-3WXA, Руководство пользователя, Страница: 43 / 70

Результаты поиска

Содержание EP-3WXA

Отзывы: