www.snapav.com Support 866.838.5052
L
R
CEN
SUB
RS
LS
AV RECEIVER/PROCESSOR
Sub Balanced Out
+12V Trigger
Out
Switched
Outlet
L
R
CEN
SUB
RS
LS
AV RECEIVER/PROCESSOR
Sub Balanced Out
+12V Trigger
Out
Switched
Outlet
ES-SUB-MEGA-D10/D12
ETHERNET
SERVICE
VOLUME
WIRELESS
PAIR
12V
TRIGGER
VOLUME
12V
TRIGGER
SERVICE
ETHERNET
ES-SUB-MEGA-D8
or
or
page | 16
www.snapav.com Support 866.838.5052
12V DC TRIGGER
The D Series MEGA subwoofers are equipped with a 12V trigger input to turn the amplifier on/off, reducing power
consumption when not in use. When this input receives a 12V signal, the amplifier turns on; when the signal goes
away, the amplifier turns off.
• Connect the 12V trigger output of the AV receiver to the 12V trigger input of the D Series subwoofer using a
high-quality 3.5 mm (1/8”) mono cable.
• If the receiver does not have a 12V trigger output, a 12V power supply plugged into a switched outlet on the
receiver provides the same functionality.
12V DC TRIGGER PIN CONFIGURATION
12V DC
(Tip)
Ground
(Sleeve)
IP CONTROL
Both S Series and D Series MEGA subwoofers are equipped with Ethernet ports for IP control. Control drivers for
many popular control systems are available on the corresponding product page of the website.
The local network interface can be accessed with the following URLs:
• http://MEGA-S8
• http://MEGA-S10
• http://MEGA-S12
• http://MEGA-S15
• http://MEGA-D8
• http://MEGA-D10
• http://MEGA-D12