www.snapav.com Support 866.838.5052
page | 10
www.snapav.com Support 866.838.5052
BACK PANEL SUBWOOFER HOOK-UP AND CONTROLS
Your Episode subwoofer is suited to match nearly every home theater or music application.
1. HI LEVEL INPUTS:
Gold-plated, five-way, binding post inputs for speaker-level connections.
2. UNBALANCED LINE IN:
For unbalanced, stereo RCA line-level connections. The RIGHT RCA unbalanced input doubles
as an LFE (low-frequency effects) input for a direct connection from the receiver or processor.
3. WIRELESS PAIRING/RESET BUTTON:
Multi-function button with the following attributes:
a. Manual Power ON:
Short press on the button: LED shows powering up process described below (section 4.
Status LED).
b. Wireless Pairing:
Press and hold the button until the LED starts blinking slowly (200 ms on/off @ 10
seconds). Release the button subwoofer now in wireless pairing mode. The LED will continue to blink slowly
for 1 min, and goes OFF if pairing is not successful.
Wireless pairing requires the Episode Subwoofer Wireless Transmitter (ES-SUB-WIFI-TX-MEGA), sold
separately. See the ES-SUB-WIFI-TX-MEGA installation manual for complete pairing set-up guide.
c. Factory Reset:
Press and hold the button until the LED starts blinking quickly (100ms on/off @ 10–15
seconds). If the button is released, subwoofer executes factory reset and restarts.
d. Button Cancel:
To cancel a Button Press without changing anything, Press and hold the button until the LED
stops flashing, 15+ seconds. Once the LED goes out, release the button.
4. STATUS LED:
Multi-function LED attributes:
a. AC Power Up:
LED blinks slowly 5 times (200 ms on/off).
b. Audio Signal Present:
One additional blink after AC Power Up, if an audio signal is present or with an Ethernet
/ 12v trigger command to turn on.
c. Adjustment Confirmation:
LED flashes slowly and continuously (200ms on/off) while making adjustments
via the Episode MEGA Subwoofer app.
d. Wireless Pairing Assistance:
For use and guidance when pairing to the optional wireless transmitter
(ES-SUB-WIFI-TX-MEGA).
e. Product On:
LED is OFF.
5. VOLUME:
Controls overall output for the subwoofer.
6. SERVICE:
USB port for future firmware updates.
x
y z
ES-SUB-MEGA-S8/S10
ES-SUB-MEGA-S12/S15
{
u
v
w
}
|
}
|
u
v w y z {
x
