www.snapav.com Support 866.838.5052
page | 19
Auto On/Off
Your subwoofer is set to
Auto On
, by default. This turns your subwoofer on when a
bass signal is received through any of the inputs. If it does not detect a signal for 15
minutes, the subwoofer goes into standby mode. Depending on the amplifier being
used, you can adjust the sensitivity between 1–10mV.
Two options available - Auto Off/On via signal or Ethernet.
Low Pass
Sets the frequency at which the Episode MEGA subwoofer starts to perform. You
can adjust the cutoff frequency by adjusting the slider. You want to match your
stereo/surround speakers so the subwoofer can blend in seamlessly.