page | 4
INTRODUCTION
Thank you for purchasing Episode® amplifiers. To complete installation, follow these
instructions. Visit our website for design recommendations and speaker calculators.
The ESA-70V2CH 2-channel, 70-volt digital power amplifier series is designed for applications
requiring two channel stereo audio, or two mono zones of audio with different sources or
levels. With low heat output thanks to digital amplification, and massive power output in a
small, 1U and 2U package, these amplifiers are guaranteed to perform.
Contents
1x ESA-70V2CH-150/300/500W Amplifier
4x Removable Feet
1x Detachable 6ft IEC Power Cable
1x Installation Manual
2x Mounting Ears for Amplifier
TOOLS
• 2.0mm slotted Flathead Screwdriver
• Wire Strippers
SPEAKER RECOMMENDATION
The ESA-70V2CH amplifier is only meant to be used with 70V loudspeakers. Use any
combination of speakers as long as the sum of the wattage does not exceed the rated
wattage of the speaker output.
