page | 10
SOURCE CONNECTIONS
Balanced Input
Use the BALANCED INPUT to connect balanced or unbalanced cables to the amplifier.
Unbalanced Connections
Use standard RCA cables to connect sources using the UNBALANCED LINE IN input. Connect
sources through the applicable mono input. Use the LOOP OUT ports to connect more
amplifiers or equipment.
ETHERNET
12V TRIGGER
IN
OUT
LOOP
OUT
CH1
CH2
UNBALANCED
INPUTS
BALANCED INPUTS
S
IR RS232
TxRx In1
In2
DRY
CONTACT
G G
Using Fixed Output Loop Out
The LOOP OUT connections on the amplifier may be used to send audio signals to other
equipment, or to the other channel of the amplifier. This connection sends audio signals out
from the UNBALANCED INPUT of the channel.
12V TRIGGER
IN
OUT
LOOP
OUT
CH1
CH2
UNBALANCED
INPUTS
BALANCED INPUTS
CH3 CH4
LEVEL
CH1
CH2
SPEAKER OUT
CH1 CH2
+
_
+
S
IR RS232
TxRx In1
In2
DRY
CONTACT
G G
+
_
+
_
G
G
_
12V TRIGGER
IN
OUT
LOOP
OUT
CH1
CH2
UNBALANCED
INPUTS
BALANCED INPUTS
CH3 CH4
LEVEL
CH1
CH2
SPEAKER OUT
CH1 CH2
+
_
+
S
IR RS232
TxRx In1
In2
DRY
CONTACT
G G
+
_
+
_
G
G
_
CH 1
CH 1
Po)
Po)
Negative(-)
Negative(-)
Negative(-)
Negative(-)
Po)
Po)
Note jumper between Shield and Negative(-).
Create the adapter shown above if there is
no balanced source and more unbalanced
source connections to the amp are needed.
Shield
Shield
Shield
Shield
Ch 2
Ch 2
Unbalanced
Loop Out 1&2
Unbalanced
Line IN 1&2
Unbalanced input can be looped out
From Source
Connect Channel 1 Loop OUT to Channel 2 Loop IN for
two channels with one source, or to equipment.
