User Guide
Install the AV.io+ Config tool
Install the AV.io+ Config tool
Epiphan’s AV.io+ Config tool is used for loading firmware updates on your AV.io HD+ and for advanced
settings changes.
You may install AV.io+ Config on the same computer(s) where you use AV.io HD+, or only on
one computer for configuration. All firmware updates and settings changes are saved to the
device and work without any software installed on the computer. For settings to persist after
power cycling, please allow 5 seconds before disconnecting or restarting device.
To install the AV.io+ Config tool, follow the directions below for your computer's operating system.
Windows
1. Download the AV.io+ Config package under the
Windows
heading on the AV.io HD+ Downloads
page on Epiphan’s web site.
https://www.epiphan.com/support/avio-hd-plus-software-documentation/
2. Extract all the files from the zip file (remember the location you're unzipping to).
3. Browse to the folder you unzipped to and open the AV.io+ Config tool by double-clicking on
EpiphanCaptureConfig.exe
. (Depending on your local security settings, you may need to right-
click and choose to run the file as an administrator).
4. AV.io+ Config starts! If your AV.io HD+ is connected to the computer by USB, it should be detected.
17
Содержание AV.io HD+
Страница 1: ...Epiphan AV io HD User Guide September 2022 1 0 UGHDPLUS 01 ...
Страница 35: ...User Guide Modify the transfer pipe 5 Click the Settings tab the Settings page appears 31 ...
Страница 37: ...User Guide Modify the transfer pipe 7 Wait for the AV io HD to process the change and you re done 33 ...
Страница 57: ...53 and 2022 Epiphan Systems Inc ...