Epic Red Epic-M Скачать руководство пользователя страница 90

Страница: 90 / 228

Version 3.0

955-0002_v3.0, Rev-B

RMD PRESETS

If an RMD file exported from REDCINE-X or REDCINE-X PRO is on the SSD it can be imported from the

SSD to the camera. When APPLY is selected, the RMD file is transferred to active system memory.

DELETE PRESET

When selected will delete the selected preset from the camera. It will not delete the selected preset from

the external media (1.8” SSD).

IMPORTANT: You will not be warned of the deletion nor asked to confirm this deletion. Be sure to

save your preset to the external media (1.8” SSD) for later use before deleting the preset from the

camera. Once you have deleted the preset, you will either need to create a new one or import and
existing one from external media.

You will be asked to confirm if you want to delete the preset. REDMOTE will also display this message

allowing you to respond.

When successfully completed, “Preset Deleted Successfully” will appear. REDMOTE will also display

this message.

Содержание Epic-M






























































































































































































































Результаты поиска

Содержание Epic-M

Отзывы:

Epic Red Epic-M, Руководство по эксплуатации, Страница: 90 / 228

Результаты поиска

Содержание Epic-M

Отзывы: