Epic Red Epic-M Скачать руководство пользователя страница 47

Страница: 47 / 228

Version 3.0

955-0002_v3.0, Rev-B

LIVE ACTION AREA

Contains the recorded image area plus Surround View™ look around area, plus overlays for Frame Guide,

Safe Action / Safe Title and the current Clip Name and Timecode values. Each overlay may be color

coded in one of 5 colors to maximize the contrast between the guide(s) and scene being captured.

LOWER STATUS ROW

The Lower Status Row provides feedback on key systems level camera values, including:

•

Clip Settings

•

Exposure (Histogram)

•

Temperature, Power and Sync

•

Media Status

•

Power Status

•

Audio Levels

ICON BEHAVIOR

•

TC Gray - No analog time code is currently detected.

•

TC Red - Analog time code is being detected, but the use of it is not enabled.

•

TC Green - Analog time code is being used to jam the time of day time code. TC will revert to gray if

the signal is no longer detected.

GEN

•

GEN Gray - No genlock signal is currently detected.

Содержание Epic-M






























































































































































































































Результаты поиска

Содержание Epic-M

Отзывы:

Epic Red Epic-M, Руководство по эксплуатации, Страница: 47 / 228

Результаты поиска

Содержание Epic-M

Отзывы: