Epic Red Epic-M Скачать руководство пользователя страница 120

Страница: 120 / 228

Version 3.0

955-0002_v3.0, Rev-B

118

HD-SDI

Options are OFF, MENUS, PREVIEW, CLEAN, OVERLAY, 3D LEFT, and 3D RIGHT.

RES

Allows you to choose the output resolution for HD-SDI monitors. Available options are AUTO, 720p and

1080p.

FREQ

Allows you to choose the output frequency in Hertz (Hz) for HD-SDI monitors. Available options are

AUTO, 23.976/24, 25, 29.976, 47.952/48, 50, and 59.94.

AUTOMATICALLY ASSIGN MENU SCREEN IF ENABLED

When checked will assign an attached external monitor to display the menus if none are selected.

TEST SIGNALS

Permits the video monitor outputs to be replaced with a video test pattern. Available test patterns are

CHIP CHART and SMPTE BARS.

To enable a desired test signal, select the desired test signal box. To exit the test signal, tap the

touchscreen one time or press the Enter or Menu button on the Side Handle or REDMOTE.

CHIP CHART

SMPTE BARS

NOTE: RED DSMC test signals are not recordable, they are provided to help align external video
monitors connected via the HD-SDI or HDMI outputs.

Содержание Epic-M






























































































































































































































Результаты поиска

Содержание Epic-M

Отзывы:

Epic Red Epic-M, Руководство по эксплуатации, Страница: 120 / 228

Результаты поиска

Содержание Epic-M

Отзывы: