Epever XTRA Series, Руководство пользователя

Страница: 42 / 60

36
Battery
over-discharged
XDB1
：
Battery indicator
Red on solid
When the battery voltage is
restored to or above LVR(low
voltage reconnect voltage), the
load will recover
XDS1
：
XDS2
：
Charging indicator Red on
solid
Battery
Overheating
XDB1
：
Battery indicator
Red slow flashing
The controller will
automatically turn the system
off. When the temperature
declines to be below 55 ºC,
the controller will resume.
XDS1
：
XDS2
：
Battery indicator
Red slow flashing
Controller
Overheating
XDB1
：
PV/BATT(orange)/Battery capacity
lever(four) indicator fast flashing
XDS2
：
PV/BATT indicator fast flashing
When the heat sink of the
controller exceeds 85
℃
, the
controller will automatically
cut off the input and output
circuit. When the temperature
is below 75
℃
, the controller
will resume work.
System voltage
error
①
Check whether the battery
voltage matches the
controller's working voltage.
②
Please change to a suitable
battery or reset the working
voltage.
Load Overload
1. The load is no output
2.XDS1/XDS2
：
①
Please reduce the number
of electric equipment.
②
Restart the controller.
Battery level shows full,
battery frame and fault
icon blink.
Battery frame and fault
icon blink.
Battery frame and fault
icon blink.
Battery level shows
empty, battery frame
and fault icon blink.
Battery level shows
empty, battery frame
and fault icon blink.