20
Note: If the controller supports 48V system voltage, the battery type will display LiFePO4
F15/F16 and Li(NiCoMn)O2 N13/N14.
Operation:
Step 1:
Press the
button to browse the battery parameters on the initial interface. Then,
press the
button to enter the battery parameters setting interface.
Step 2:
Long-press the
button to enter the battery-type interface.
Step 3:
Press the
or
button to select the battery type.
Step 4:
Press the
button to confirm.
Step5:
Continue to press the
button twice or wait for 10S of no-operation to automatically go
back to the battery parameters setting interface.
CAUTION
Please refer to chapter 4.1 for the battery control voltage setting when the
battery type is User.
2) Battery capacity
Operation:
Step 1:
Press the
button to browse the battery parameters on the initial interface. Then,
press the
button to enter the battery parameters setting interface.
Step 2:
Long-press the
button to enter the battery-type interface.
Step 3:
Press the
button to jump to the battery capacity interface.
Step 4:
Press the
or
button to set the battery capacity.
Step 5:
Press the
button to confirm.
3) Temperature units
Operation:
Содержание XTRA Series
Страница 2: ......
Страница 4: ......
Страница 60: ...HUIZHOU EPEVER TECHNOLOGY CO LTD Tel 86 752 3889706 E mail info epever com Website www epever com...
