Epever MSC-N Series, Руководство пользователя

Страница: 16 / 44

12
Press for 5s Enter the Battery type setting interface
2.3
Battery type
①
Supported battery types
1
Lead-acid
battery
Sealed (default, 12V Sealed/24V Sealed)
Gel (12V Gel/24V Gel)
2
Lithium
battery
LiFePO4 (12V LFP/24V LFP)
Li(NiCoMn)O2 (12V LNCM/24V LNCM)
3
User
②
Setting the battery type by the controller button
Step1 : Press the controller button for 5s until the indicator blinks orange
slowly. Enter the battery type setting mode.
Step2 : Click the controller button to switch the battery type. The battery type is
cycled in the following sequence:
“12V Sealed →
12V Gel
→
12V LFP
→
12V LNCM
→
24V Sealed
→
24V Gel
→
24V LFP
→
24V LNCM
→
User
→
12V Sealed
→ ……
”.
Distinguish the battery type by observing the indicators' status.
Step3 : Press the controller button for 5s to confirm.
2.4
Battery voltage control parameters
Set the battery type as "User" by the controller button, remote meter, or the PC
software. Then the voltage control parameters can be modified.
 Battery parameters
Below values are measured in the 12V/25 ºC system; please double the values in the
24V system.