ePad
Ans:
the touch panel coordinate doesn’t match LCD causes it. Please do following
to resolve it first.
-
Tap
Start
>
Settings
>
Control panel
>
Stylus
>
Calibration
.
-
Click
Recalibrate
.
-
Carefully press and briefly hold stylus on the center of the target, repeat as
the target moves around the screen.
-
After finish 5-point calibration, click on the screen again or press enter key
(swing switch) to accept it.
How long does the data preserve on the DRAM?
Ans:
if the battery is full of charged, DRAM data can preserve for 20 days. If
battery capacity lows to 10%, system will obligate to suspend by system until
any new fresh power applies. In this situation, DRAM data may preserve for
24 hours. Please take some actions to refill power supply of ePad as soon
as possible.
The other way to preserve data is to save them into on board FLASH. Our on
board FLASH is a nonvolatile storage media. To accomplish it, choose the
save directory from “windows” folder to “FLASH” under “my computer”.
Can I preserve my installed program after lost of power?
Ans:
Yes, but not every program. And some steps you have to take. As mention
above, there is a nonvolatile “FLASH” folder under “my computer”, you can
install your program into it (there will have a dialog window asks you where
you want installed to during setup a new program).
Sometimes, there are some files of your program copied into windows
directory such as .dll. You should to find them out and backup (.dll) to
“FLASH” folder by yourself (to view .dll files, you need to enable “displaying
- 28 -
User’s guide
