Step 3: in the Print window, choose your printer type (PCL Laser or Inkjet) and Port
as USB or Network. If you use network printer, enter its path in Network Path. Other
options you can set them by yourselves.
Battery
General description:
Your
is equipped with a Lithium polymer battery. It’s very slim and light.
The main built-in battery has a switch locates on the bottom side and beneath Irda
cover (refer to item 15, Hardware Configuration). It is used to break away power
supply path of built-in battery to system for safety reason. Make sure it is properly
locked before you start to use it.
Discharge:
Its battery-hour is about 4 hours that is tested at situation of full charged, continuous
working and no power saving enabled.
An external secondary battery pack as an optional accessory can provide you
another 4 battery-hour while you have such demand.
If ePad is powered by battery only
, OS will go off (suspend) automatically as its
capacity is going down to 10%. This is in order to keep the data of DRAM. To
release it, please have another power source in (AC or secondary battery).
A 10% capacity remained battery can keep your DRAM data for 24 hours. Please
get it charged as soon as possible. You may lose data that saved in DRAM but not
in FLASH. Refer to “On board Flash memory” section to learn how to take
advantage of it.
Charge:
According to characteristic of Lithium battery, there is almost no “memory” effect
on it. That is to say, you don’t need to discharge it before charge.
ePad allows you to charge battery as long as you plug AC adapter in, no matter it
is on or off, battery breaker is broken or not. It takes about 2.5 hours to charge it
- 13 -
User’s guide
ePad
ePad
