Getting Started
Step 1
,
While first opening ePad gift box, please make sure that no device
damaged or components lost in this package.
Step 2,
Remove the film on your ePad surface; it’s for protecting screen.
Step 3,
Built-in battery is charged to 50~80% of its capacity before shipping. Even
Step 4,
Find out “Main battery breaker” on the bottom side (it is
covered by Microsoft Windows CE .NET license label),
push the bar to the left until you feel it has been locked.
so, we suggest you charge it for more than 8 hours for the first time.
Warning!
Make sure this breaker bar is locked on the left hole. Uncertain lock
may cause power lose and may corrupt file storage.
Step 5,
It takes 36 seconds to boot for the first time. 5 seconds for bring up to boot
loader screen, next 25 seconds for loading OS image to DRAM (process is
showed on the screen). Then 6 seconds with blank screen for bringing up
desktop. During the course of booting, the red Message LED is on till OS
brings up. Lost power or hardware reset will go through this process again.
Step 6,
Set current date and time to ePad by tapping
Start
>
Settings
>
Control panel
>
Date/Time
. This setting can be done by tap “time” on the right-bottom
corner of system tray.
Step 7,
Calibrate touch panel by tapping
Start
>
Settings
>
Control panel
>
Stylus
.
Step 8,
Give an asset’s name for this one by tapping
Start
>
Settings
>
Control panel
>
System
>
Device name.
- 10 -
User’s guide
ePad
