EP Equipment IMOW ICE251, Руководство по эксплуатации

Страница: 48 / 95

41
B = Every 1000 operating hours, or at least annually
C = Every 2000 operating hours, or at least annually
W service intervals are to be performed by the customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner
must check the wheel nuts/bolts and re-tighten if necessary.
5.3.1 Maintenance Checklist
Maintenance
interval
●
W A B C
Braking Check magnetic brake air gap.
●
Electrical
system Test instruments, displays and control switches.
●
Test warning and safety device.
●
Make sure wire connections are secure and check for
damage.
●
Test micro switch setting.
●
Check contactors and relays.
●
Fix the motor and cable.
●
Power
supply Visually inspect battery.
●
Visually inspect battery plug.
●
Check battery cable connections are secure, grease
terminals if necessary.
●
Travel Check transmission for noise and leakage.
●
Check travel mechanism, adjust and lubricate if
necessary.
●
Check wheels for wear and damage.
●
Check wheel suspension and attachments.
●
Check drive support plate.
●
Truck
frame Check chassis for damage.
●
Check labels.
●
Check mast attachment.
●
Check screw connections.
●
Check gates and panels are secure and free of damage.
●
Hydraulic
operations Test hydraulic system.
●
Check that hose and pipe lines and their connections are
secure, check for leaks and damage.
●
Check cylinders and piston rods for damage and leaks,
and make sure they are secure.
●
Check hydraulic oil level.
●
Replace hydraulic oil.
●