EP Equipment IMOW ICE251, Руководство по эксплуатации

Страница: 46 / 95

39
5.Forklift Truck Maintenance
5.1Operational safety and environmental protection
· The fork lift truck needs termly inspection and
maintenance,
make it in good working
condition.
· Inspection and maintenance are usually
ignored, you must find the problems and solve
it in time.
· Use the provided spare parts.
· Don’t use different oil when changing or
adding oil.
· Forbid to repair the fork lift truck if you haven’t
been trained.
· Don’t rave about oil out of date.
· Maintenance on schedule.
· After you make a maintenance, you’d better make a record.
5.2 Maintenance Safety Regulations
Maintenance personnel
Forklift Truck must only be serviced and maintained by the manufacturer’s trained
personnel.
The manufacturer’s service department has field technicians specially trained for
these tasks. We therefore recommend a maintenance contract with the
manufacturer’s local service centre.
Lifting and jacking up
When the Forklift Truck is to be lifted, the lifting gear must only be secured to the
points specially provided for this purpose.
When jacking up the Forklift Truck, take appropriate measures to prevent it from
slipping or tipping over (e.g. wedges, wooden blocks). You may only work underneath
a raised load handler if it is supported by a sufficiently strong chain.
Cleaning
Do not use flammable liquids to clean the Forklift Truck.
Prior to cleaning, all safety measures required to prevent sparking (e.g. through short
circuits) must be taken. For battery-operated Forklift Truck , the battery connector
must be removed. Only weak suction or compressed air and non-conductive antistatic
brushes may be used for cleaning electric or electronic assemblies.
Notice!
·No smoking.
·You should shut off key switch and
pull off the plug before service.
（
except
some trouble shooting
）
.
·Clean the electric part with compress
air, do not with water.
·Do not place your hands, feet or any
part of body into the gap between the
mast and instrument.