EP Equipment CQE12R, Руководство по эксплуатации

Страница: 9 / 39

1
Correct use and Application
The truck described in the operation manual is an industrial truck designed for lifting
and transporting load units.
It must be used, operated and serviced in accordance with the present instructions.
Any other type of use is beyond the scope of application and can result in damage to
personnel, the truck or property. In particular, avoid overloading the truck with loads
which are too heavy or placed on one side. The data plate attached to the truck or the
load diagram are binding for the maximum load capacity. The truck must not be used
in fire or explosion endangered areas, or areas threatened by corrosion or excessive
dust.
Proprietor responsibilities
For the purposes of the operation
manual the “proprietor” is defined as any natural or
legal person who either uses the truck himself, or on whose behalf it is used. In
special cases (e.g. leasing or renting) the proprietor is considered the person who, in
accordance with existing contractual agreements between the owner and user of the
truck, is charged with operational duties.
The proprietor must ensure that the truck is used only for the purpose it is intended for
and that danger to life and limb of the user and third parties are excluded.
Furthermore, accident prevention regulations, safety regulations and operating, servi-
cing and repair guidelines must be followed. The proprietor must ensure that all truck
users have read and understood this operator manual.
Failure to comply with the operation manual shall invalidate the warranty. The same
applies if improper work is carried out on the truck by the customer or third parties
without the permission o
f the manufacturer’s customer service department.
Adding accessories
The mounting or installation of additional equipment which affects or enhances the
performance of the truck requires the written permission of the manufacturer. Local
authority approval may also need to be obtained.
Local authority approval does not however constitute the manufacturer’s approval.