EP Equipment CQE12R, Руководство по эксплуатации

Страница: 29 / 39

21
– Park the Reach Truck securely(See 3.2.4 Parking the Reach Truck securely ).
– Open the battery cap(2) to exposing the battery(See 4.2.1 Exposing the battery ).
– Remove the battery plug (3).
– Connect the battery plug (3) with the charging lead of the stationary charger (4) and
turn on the charger.
NOTE:This picture is just a sample.
4.3Battery removal and installation
4.3.1Changing the battery
– Park the truck securely(See 3.2.4
Parking the truck securely ).
– Expose the battery ( See 4.2.1
Exposing the battery ).
– Remove the battery connector (2).
– Pull out the battery plate (3).
– Pull out the battery (4).
When replacing a battery always use the
same battery type. Extra weights must not
be removed and must remain in the same
position.
NOTE:This picture is just a sample.
4.4Battery maintenance
Do not overuse battery:
• If you use up the energy of battery till the forklift immovability, you will shorten its
working hours.
• If battery discharge indicator showing the red segment, please charge it quickly.
Battery maintenance:
The battery cell covers must be kept dry and clean. The terminals and cable shoes
must be clean, secure and have a light coating of dielectric grease.Batteries with non
insulated terminals must be covered with a non slip insulation mat.