EP Equipment CQE12R, Руководство по эксплуатации

Страница: 39 / 39

31
6.Troubleshooting
This chapter is designed to help the user identify and rectify basic faults or the results
of incorrect operation. When locating a fault, proceed in the order shown in the table.
Fault Possible cause Action
Reach
Truck does
not start.
• Key switch in “OFF” position
• Battery charge too low
• Faulty fuse
•Reach Truck in charge mode • Set key switch to “I”
• Check battery charge, charge
battery if Necessary
• Test fuses
• Interrupt charging
Load can
not be
lifted
• Hydraulic oil level too low
• Excessive load • Check the hydraulic oil level
• Note maximum capacity (see
data plate)
If the fault cannot be rectified after carrying out the remedial procedure, notify the
manufacturer ’ s service department ,as any further troubleshooting can only be
performed by specially trained and qualified service personnel.