manualshive.com logo in svg

EOS Zeus HD, Инструкция по установке и эксплуатации

Поделиться
Скачать
EOS Zeus HD Скачать руководство пользователя страница 15

3

EOS Zeus HD / Zeus L HD - Installation and Operating Instructions

EN-15

Installation

Installation

This chapter describes how to install Zeus HD. Prior to installing the unit, air 
inlets and outlets must be installed in the cabin. It may be necessary to 
mount additional fans in the inlets/outlets. All protective films must be 
removed.

NOTICE

Damage due to incorrect mounting location

The heater is not suitable for outdoor use.

The heater must be operated only inside buildings and may not 
be exposed to environmental conditions such as extreme hu-
midity and moisture or the possible formation of condensation 
or corrosive substances in the ambient air, as well as other 
weather conditions.

The heater is not designed to be installed or set up in an alcove 
or under a bench or sloping roof.

3.1   Specifications for the cabin

The cabin must be planned and installed according to specifications before 
the heater is installed. The width of the door must equal at least 72 cm.
The sauna heater must be level.
In general, it should be noted that the sauna heater must not be set on a 
floor made of highly flammable material such as laminate, flooring made 
of plastic material, etc. Ceramic tiles are recommended as a flooring option.

Electrical lines

All electrical installations laid inside the cabin must be suitable for silicone 
cables and a temperature of at least 170°C.
All lines must be routed in such a way that they are well-protected, e.g. in a 
cable duct. 
EOS recommends laying all connecting cables through a bendable metal 
tube connected to the protective conductor.

Содержание Zeus HD

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды