Relay Box for Infrared Cabins - Installation Instructions
57
Commissioning
7.3.1 Setting the IR operating mode
After installation, you can set the operating mode, temperature and/or
intensity for each IR cabin. You can also define the switching hysteresis for
the IR emitters.
The following icons are displayed for selection.
Setting the operating mode
1
Press and hold the emitter icon for 5 seconds.
IR temperature operating mode:
You can set the temperature of the IR emitters and the intensity per
channel.
IR intensity operating mode:
You can set the intensity of the IR emitters per channel.
°C
IR
IR
08:45:40
11. June 2019
IR
°C
IR
Settings
Operation mode
12:45:40
25. June 2019