EOS Ecomat, Инструкция по сборке и эксплуатации

Страница: 23 / 43

23 GB
Technical data
Voltage: 400 V AC 3N, 50 Hz
Power intake: 6,0 kW / 8,0 kW
Height: 900 mm when mounted 250 mm
above fl oor level
Width: 375 mm, depth: 360 mm
Stone capacity: 15 kg
Discharge current: max. 0.75 mA per kW of
heating output
Sauna heater for family saunas
The delivery package includes the follow-
ing components:
- sauna heater
- set of sauna stones, packed separately in
a fabric bag
- accessory bag, including:
1 cable connector assembly PG 13,5
4 tension-plate screws
- an oven-sensor board with overheat shu-
toff protection, KTY-sensors
with sensor housing, two 3x25 mm fa-
stening screws and a 3,0 m long sensor
cable.
-grommet
-a replacement overheat protection module
The sauna heating unit is designed for ope-
ration with an input voltage of 400 V AC 3N
through the sauna control unit.
The sauna cabin must have a minimum
inside height of 1.90 m
During installation of the sauna heating unit,
it is important to ensure that the vertical
distance between the upper surface of the
Minimum distances
Installation
sauna heating unit and the sauna cabin
ceiling is not less than 90 cm.
36 cm
8 cm
8 cm 37,5 cm 8 cm
Illust. 1
1. Center wall mounting over the air intake
vent as in Illust. 2+ 3 and bolt onto cabin
wall with the particle board screws provi-
ded
6
4
cm
5
8
,5
cm
Illust. 2
Illust. 3
Cabin wall
Oven safe-
ty grid
Wall mounting
Air intake
vent
Wall mounting
Air intake
vent
mi
n. 1
0 cm
34
cm
8
0
cm