EOS Ecomat, Инструкция по сборке и эксплуатации

Страница: 24 / 43

24 GB
Drill a hole measuring approx. 10 cm in dia-
meter in the cabin wall at the point where the
main power cable is to be inserted. Run the
cable through the hole toward the outside of
the sauna cabin and connect it to the main
power line in a distributor box suitable for use
in moist environments.
This operation must be performed in accor-
dance with the circuit diagram on the control
panel and the regulations of the local EVU
and the VDE.
Caution! The local site installation
must provide for suffi cient fuse capa-
city and an emergency power cut-off switch.
F r e s h - a i r
inlet
Power cable
Heater safety
grate
2. Hook the sauna heating unit into the wall
mounting using the mounting slots on the
rear wall and place against the spacer
(Illust.4).
3. Fasten the sauna heating unit to the wall
mounting through the hole located on the rear
edge of the oven using self-tapping screw
(Illust. 6).
Illust. 6
Mounting screw
mi
n
.
2
5
cm
Illust. 4
Illust. 5
2
1