enz Cutting Ball CB, Руководство по эксплуатации

Страница: 14 / 20

14 ©2020 enz® technik ag June 4, 2020
Adding Vibration
CB
In case of hard deposits, you can add more vibration.
Stage 1
Loosen the locking screw and remove the eccentric weight.
Screw the locking screw back into the cutting ball.
Stage 2 (CB90)
Remove the locking screw and the eccentric weight. You
should now be able to cut away hard deposits.
After use, put the eccentric weight and the lock screw back
in place. This will prevent parts from getting lost.
Eccentric weight
Locking screw