8
AFTER INSTALLING THIS UNIT,
PLEASE PASS ONTO END USER
DO NOT THROW AWAY
If the two LEDs situated just
above the button flash alternately
red and green (when it is
pressed) the control will need
to be reprogrammed. Call your
maintenance company or
EnviroVent for advice.
Heater enable ON
Auto LED stays on constant for a few seconds.
Heater enable OFF
Auto LED flashes for a few seconds.
Boost
(Green)
(Green)
Remote Control out
of range
(Red)
Heater enable
(Red)
Remote Control in
range
(Green)
LED Colours
Constant Red
Flashing Red
Constant Green
For heater enable/disable
Press button for five
seconds turns heater
enable off. LED will flash
red for a few seconds
Press button for five seconds
turns heater enable on. LED
will show constant red for a
few seconds
