KUDOS HT
Models incorporating an adjustable humidity sensor that can be set between 60 and 90%
relative humidity with a timer that can be adjusted between 1 and 30 minutes.
In timer mode the KUDOS operates at slow speed.
IMPORTANT: The humidity sensor on the KUDOS fans are factory set to 60%. To
modify the factory settings, the potentiometers are situated beside the connection
cover (Fig. 9B). These are fragile and must be handled with care. To increase the
humidity percentage setting, turn the “%Hr” potentiometer clockwise (this will
decrease the sensitivity).
You should not attempt to adjust the settings when the fan is in timer mode. Wait
until the set time has elapsed before adjusting the settings.
Operation
1)
Automatic working mode (Fig. 8A). The fan switches on automatically at high
sped when the humidity level is above the selected value. It stops when the
humidity level drops below this value and when the time set by the timer has
elapsed. When the fan operates at slow speed in timer mode.
2)
Automatic operation working in conjunction with a light switch (Fig. 8B). The fan
will operate even if the humidity level is below the set value. When the light switch
is turned off, the fan will continue to operate at slow speed for the length of time
set by the timer.
ATTENTION: When the relative humidity is above the set value automatic
operation prevails over manual operation
—
the fan cannot be turned off by the
switch.
CLEANING AND MAINTENANCE
IMPORTANT:
DISCONNECT FROM THE MAINS SUPPLY BEFORE CARRYING OUT
CLEANING OR MAINTENANCE
To ensure optimum performance from your extract fan, it should be inspected and
cleaned regularly to remove the build up of dust and dirt. To do so, wipe the inlets and
front grille with a damp cloth. Remove the front section and hand wash in warm soapy
water. Ensure that the front cover is completely dry before reassembling.
AFTER SALES SERVICE
We recommend you do not dismantle or remove any other parts than those mentioned,
as any tampering would automatically cancel the guarantee. If you detect any fault,
contact
EnviroVent
on 01423 810810.
Thank you for choosing EnviroVent - the fastest growing ventilation company in the UK.
And remember, if you have any problems please call our dedicated Technical Team on
the
Hotline 0845 27 27 810.
Содержание kudos
Страница 1: ...KUDOS Instruction leaflet...
Страница 3: ...INSTALLATION KUDOS 1 2 3 4 6 7 6 7 5 8 Fig 1 Fig 2A Fig 2B 9 3 Fig 1B...
Страница 11: ......
