background image

AFTER INSTALLING THIS UNIT PLEASE PASS ONTO END USER

DO NOT THROW AWAY

09

 Maintenance  

16

Filter cover

Filters x 2 Part number 

FILTER-ES250

Front cover

General advice

It  is  recommended  that  airflows  at  the 

diffusers  are  periodically  checked  by  the 

resident or home owner.

Filter  Maintenance  -  to  be  checked  as 

required. 6 to 12 months recommended

1.  Switch off the power supply

2.  Remove front panel
3.  Remove filter covers

4.  Remove the filters

5.  Vacuum the outside of the filter or replace 

if required

6.  After cleaning replace filters at same side

7.  Replace filter covers and front panel

Clearing filter indication

• To clear the filter indication light press plus 

(+) and  minus (-) on the switch panel for 

4 seconds.

•  When all the LEDs light up press SET for 

1 second.

This will reset the filter counter and no more action is required. Filter indicator is set to 12 

months as standard.

Filter maintenance is required for the proper function of the unit, not doing so may 

invalidate the warranty.

Major service

This is to be carried out at five years by EnviroVent or approved maintenance company.

1 sec

4 sec

Содержание energisava250





















Отзывы: