Envirovent energisava250, Руководство по установке

Страница: 15 / 20

AFTER INSTALLING THIS UNIT PLEASE PASS ONTO END USER
DO NOT THROW AWAY
14
07 Commissioning Part 2
Boost controls
The energiSava 250 operates continuously
on ‘Normal’ setting to ensure the home is
ventilated at the appropriate level although
you can boost the system via the remote
control switch.
For remote control switches, press the
button once to see the current status of your
unit and again to boost the unit. The boost
LED will light and the unit will go to boost for
20 minutes.
Indications:
To view the current status of your unit press
the button once. The functions currently in
operation will be indicated with a lit LED.
If the filter light is on the filters will need
checking, see maintenance pages 16-17.
Warnings:
All LEDs flashing indicates a fault with the
unit.
Batteries:
When the battery requires changing,
unscrew the switch front cover. The battery
is located on the back of the cover. Battery
type - 3V Lithium, CR2032.
To pair additional RC units (RC units only)
1. Remove stop A on the control panel
2. Insert insulated point 15mm into hole A to
contact push button
3. Press for 5 seconds until unit LED (B)
flashes, then release
4. Press RC button and the green LED will
light
5. RC is now paired
6. Replace stop A
Filter
Frost
Connection
Summer
bypass
Boost
Humidity
Switch