Enviro Q1C, Руководство пользователя

Страница: 41 / 48

3. Next, remove the top brick panel retainers on each side as shown in Figure 56 using a T20 screwdriver.
4. Carefully remove the left, rear, and right brick panels from the firebox.
5. Install the rear porcelain panel first by sitting it on the ledge
at the rear of the firebox (see figure 57), then follow with
the left and right panels.
6. Re-install the brick panel retainer screws and brackets
7. Re-install the firebox baffle.
8. Install the top porcelain panel by screwing it to the firebox
baffle as show in Figure 58 using the supplied screws.
9. Re-install the coal set as outlined in the previous section.
10. Re-Install the glass door
Secondary Installation
o
ptional
p
orcelain
p
anels
(50-2939) i
nstallation anD
r
emoval
:
Turn off the gas control knob and allow the
unit to cool.
Please ensure that your porcelain panels have not
been damaged.
To Install Panels:
1. Remove the glass door by following the
instruction in the “ M
aIntenance anD
s
erVIce
-
g
lass
D
oor
r
eMoVa
l” section and remove the
coal set as outlined in the previous section.
2. Remove the firebox baffle by unscrewing the
two screws indicated in Figure 50 using a T20
screwdriver. Lower the front of the baffle down
and then lift it out of the two locating screws at
the rear of the firebox.
Figure 55. Baffle Screws.
Figure 56. Top Panel Retainers.
Figure 57. Rear Panel Ledge. Figure 58. Top Panel Screws.
41