Enviro Water Products Pro Series Water Filter and Salt Free
Softening Systems
© 2014 Enviro Water Solutions LLC
3060 Performance Circle, Suite 2. DeLand, FL 32724
Rev B
Page 6
www.envirowaterproducts.com
Installation Overview
Figure 1
Pre-Installation
Bypass Valve Installation
Figure 2
The Bypass Valve comes pre-assembled and ready to install with the O-Rings, Split Rings, and Quick
Connect Nuts. Push the Bypass Valve into the head of both the Enviro Water Products Whole House Water
Filter and Salt Free Water Softener/Conditioner with the unthreaded ends oriented toward the tanks and
hand-tighten the Quick Connect Nuts.
Notice:
The bypass valve(s) included with this system are designed for multiple Enviro Water Products water
systems. This may result in the arrows on the bypass valve(s) pointing differently than shown. If the
arrows on your bypass valve(s) do not match the diagram, remove the red arrows by pulling them straight
up, turn them 180° to match the drawing, and push them back down onto the stem.
IN
OUT
Outgoing
Water
To House
Incoming
Water
Supply
Wall
Wall
19"
Whole House Water Filter
Pre-Filter
Salt Free Water
Softener/Conditioner
UPFLOW
INLET
DOWNFLOW
INLET
Quick Connect Nut
Red Arrow
Water Filter Head
Whole House
Water Filter