1. Turn off the hot tank heater switch
on the back of the dispenser and
unplug your unit
(Fig 1)
. Let the unit
stand for one hour before cleaning
to allow the hot tank to cool.
Fig 2
Fig 3
Fig 4
DIY: HOW TO CLEAN
YOUR WATER DISPENSER
Your water dispenser exterior should be thoroughly cleaned every 6 months, and
your CrystalFlo water cartridge replaced every 12 months. If you do not have a
replacement cartridge handy, you can order one
here
and it will be shipped
directly to you.
Before you start cleaning, wash your hands thoroughly with soap and water for at least 20 seconds.
TIP:
Have a bucket nearby to dispose of the used
CrystalFlo cartridge, which will contain water.
TM
3. Press the cover lock on the top rim
of the cooler and pull up to open
(Fig 3)
.
4. Pull CrystalFlo water cartridge upward to remove
(Fig 4)
. Do not squeeze
the water reservoir as water could leak out.
WHAT YOU’LL NEED:
• CrystalFlo replacement cartridge
• 70% rubbing alcohol or disinfecting wipes
• Clean cloth or soft brush
• Rubber gloves
• Bucket
• Towels to absorb any water spills
TIP:
The best time to replace your water cartridge and clean your dispenser
is when the existing water bottle is empty.
WARNING:
Always use caution when handling hot water.
2. Place a glass or other container
below the water faucets to catch
any drips
(Fig 2)
.
Fig 1
