Enviro G39L, Руководство пользователя

Страница: 13 / 54

13
F
Ront
b
uRneR
R
emoVaL
:
1. Remove the surround panel (see M
aIntenance anD
s
erVIce
- s
urrounD
P
anel
r
eMoVal
).
2. Remove the door cover (see M
aIntenance anD
s
erVIce
- D
oor
c
oVer
r
eMoVal
).
3. Remove the glass door (see M
aIntenance anD
s
erVIce
- G
lass
D
oor
r
eMoVal
)
4. Remove log set (if installed).
Maintenance And Service
5. Remove the Log Grate using a T-20
screwdriver.
6. Remove the two T-20 screws securing the
front burner pan (see Figure 10). Slide the
pan to the left and lift out. Reassemble in
the reverse order.
Figure 10. Front Burner Removal
The burners will need to be removed for maintenance and fuel conversion. Follow the procedure carefully.
Proceed only when the unit has completely cooled down.
A
DETAIL
A
SCALE 1 : 5
F
ueL
c
onVeRsion
:
TO BE INSTALLED BY A QUALIFIED SERVICE AGENCY ONLY
Please read and understand these instructions before installing.
Warning: This conversion kit shall be installed by a qualified service agency in accordance
with the manufacturer’s instructions and all applicable codes and requirements of the
authority having jurisdiction. If the information in these instructions is not followed
exactly, a fire, explosion or production of carbon monoxide may result causing property
damage, personal injury or loss of life. The qualified service agency is responsible for
the proper installation of this kit. The installation is not proper or complete until the
operation of the converted appliance is checked as specified in the manufacturer’s
instructions supplied with the kit.
Kit Parts List for G39L Model:
1 - Burner Orifice (LP - DMS #52 ) as marked
1 - Installation Instruction Sheet
2 - Conversion Labels
Carefully inspect all parts supplied with this conversion kit. If any parts have been damaged or are
missing, contact your dealer, distributor or courier company to have them replaced before starting this
installation.