DECIDING WHERE TO LOCATE YOUR STOVE
DIMENSIONS:
FIG. 1
Front Width:
22"/ 56 cm
Rear Width:
22"/ 56 cm
Height: 27-1/2"/ 70 cm*
Depth
19"/ 48 cm
(*not including vent coupling)
Shipping Weight: 210 lbs/95 kg
CLEARANCES:
A. Side wall to stove
10"/ 25 cm
B. Rear wall to stove
4"/ 10 cm
C. Combustible to stove Top
22”/ 56 cm
D. Floor to stove
0"/ 0 cm
E. Corner clearance
2"/ 5 cm
F. Alcove depth
48"/ 122 cm
Maintain sufficient clearances
for service and maintenance
FIG. 2
•
The stove should be located out of traffic and away from furniture and draperies.
•
The stove should have sufficient access for its safe operation and maintenance.
•
Locate a position where the flue system of the stove can be properly installed without damaging the integrity
of the building. e.g. cutting a wall or ceiling joist.
•
The stove can be installed on any standard flooring materials i.e. Wood, carpet or linoleum.
•
Check stove and flue system clearance requirements.
•
Locate the stove where it can be accessed by a gas supply line.
•
Locate the stove in a large and open room that is centrally located in the house. This will optimize heat
circulation and comfort.
•
As the stove is equipped with a convection fan, ensure that an electrical outlet is within 6ft. (1.8m) of the
stove.
•
These stoves can be installed in bedrooms.
(
IN CANADA
: must be installed with a listed wall thermostat)
(
IN USA
: see current ANSI Z223.1 for installation instructions.)
•
The
flow of combustion and ventilation air must not be obstructed.
4
