35
WARNINGS: DO NOT pack this ember material as this could create an unsafe condition. The pieces
should be lightly placed so they don’t block any of the burner ports.
CAUTION: Use only the type of ember material supplied with this fireplace. Due to the irregular size
of the ember material, there is more than required. Use of other foreign materials on the burners may
create dangerous conditions.
Figure 51: Place the log grate in front of the
burner tube using the two slotted mounts
underneath.
Figure 52: The ember wool comes in chunks
that can be ripped into smaller pieces.
Place quarter-sized pieces of the ember wool
irregularly onto and around the front of the
burner to create a realistic look.
Figure 53: The left and right logs fit as shown.
The bottom of the left log is contoured to fit
the log grate.
Secondary Installation
Figure 51. Third Stage Log Set Installation.
Figure 53. Fifth Stage Log Set Installation.
Figure 52. Fourth Stage Log Set Installation.
