TRANSMITTER (Remote Control with LCD
Display)
The Proflame Transmitter uses a streamline
design with a simple button layout and
informative LCD display (Figure 5). The
Transmitter is powered by three (3) AAA type
batteries. A Mode Key is provided to Index
between the features and a Thermostat
Key is used to turn on/off or index through
Thermostat functions (Figure 5 & 6).
RECEIVER
The Proflame Receiver (Figure 7) connects directly to
the gas valve, stepper motor, DFC, and Fan Control
Module with a wiring harness. The Receiver is
powered by four (4) AA type batteries. The Receiver
accepts commands via radio frequency from the
Transmitter to operate the appliance in accordance
with the particular Proflame system configuration.
The Receiver three (3) position slider switch can be
set to one of three positions: ON (Manual Override),
Remote (Remote control), or Off.
Figure 5: Proflame Transmitter.
Figure 6: Proflame Transmitter LCD Screen.
Figure 7: Proflame Receiver.
FAN CONTROL MODULE
Fan Control Module (FCM) offers the added
ability to control the fan speed through six (6)
speeds, a remotely actuated 120V outlet and
a constantly powered 120V outlet. The FCM
provides DC power to the Receiver allowing the
batteries to be used only when line power is
interrupted or lost (see Figure 8).
Figure 8: Proflame Fan Control Module.
Operating Instructions
10
