50-2628
Massachusetts installations (Warning): This product must be installed by a licensed plumber or gas fitter
when installed within the Commonwealth of Massachusetts. Other Massachusetts code requirements:
Flexible connector must not be longer than 36in., a shut off valve must be installed; only direct vent
sealed combustion products are approved for bedrooms/bathrooms. A carbon monoxide detector is
required in all rooms containing gas fired direct vent appliances. The fireplace damper must be removed
or welded in the open position prior to installation of a fireplace insert.
This appliance is only for use with the type of gas indicated on
the rating plate. This appliance is not convertible for use with
other gases, unless a certified kit is used.
WHAT TO DO IF YOU SMELL GAS
• Open windows/extinguish any open
flame.
• Do not try to light any appliance.
• Do not touch any electrical switch
or use any phone in your building.
• Immediately call your gas supplier
from a neighbour’s phone. Follow
the gas supplier’s instructions.
• If you cannot reach your gas
supplier, call the fire department.
WARNING:
If the information in this manual
is not followed exactly, a fire or explosion may
result causing property damage, personal injury
or loss of life. Installation and service must be
performed by a qualified installer, service agency
or the gas supplier.
FOR YOUR SAFETY
Do not store or use
gasoline or other
flammable vapours
and liquids in the
vicinity of this or any
other appliance.
INSTALLER:
Leave this manual
with the appliance.
CONSUMER:
Retain this manual for
future reference.
OWNER’S MANUAL
E44I
Gas Insert -
Log Set & Proflame IPI Valve
WARRANTY
REGISTRA
TION
enviro.com/warranty
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
4001609
