Enviro 828 BV. INS., Руководство пользователя

Страница: 13 / 20

10. INSTALLATION OF LOG SET and EMBERS
A. INSTALLING THE GLOWING EMBERS
A bag of ceramic fiber embers is provided for use on the
front burner tray.
CAUTION: Use only the type of ember material supplied
with this appliance. Due to the irregular size of the
ember material there may be more than required. The
use of other foreign materials on the burners may create
dangerous conditions.
If over time, through cleaning and servicing these
embers require replacement, contact your nearest
ENVIROGAS dealer for replacement embers.
1. Gently remove the ember material from the plastic bag. Spreading these pieces evenly across the front of the
ember tray, Use only a single layer. Do not pile embers. Place a single row of embers on top of the front
burner. (Figure. 16)
Figure 16
2. Carefully avoid any clumping or large build ups.
Do not pack down, leave embers loose.
3.
DO NOT PLACE EMBERS ON THE REAR BURNER.
4. Upon the first light up, watch for ignition to
all burner ports. If a long delay is noted:
a) First, wait for the appliance to cool down
b) Open the front door of the appliance.
c) Carefully reposition the embers making
sure that burner ports are not plugged solid or blocked
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE DOOR REMOVED
INSTALLING THE LOG
Figure 17
Carefully remove log from unit. Check to ensure
there is no damage. It is very important to
install this log in its proper position to insure
safe optimum operating conditions.
1. Open the front door.
2. Place log with Burnt Area forward on log
supports. By matching bottom pegs to the
receiving holes in log supports.
3. Close door securely.
13