24
Fan
White
Black
Black
Black
Fan Temp Sensor
Fan
Controller
(Rheostat)
Power Supply
Ground
Rocker Switch
WIRE B (Black) - 12”
WIRE A (Black) - 26”
WIRE C (Black) - 14” + 14”
AUTO
OFF
MANUAL
Installation
Figure 24: KI Fan Wiring Diagram.
The KI Insert comes with the fan assembled and
installed in the left shroud.
1) Remove fan shourd, there are two 8-32 T-20
screws mounting it to the fi rebox, there are two
½” hole in the cabinet side to access screws.
2) Disconnect all electrical connections to the fan.
3) Remove the four 8-32 X ¾” hex head screws
that hold the fan mounting plate to the shroud.
4) Remove the fan control knob and nut from the
front of the shroud and pull the controls out the
back.
5) Install the fan kit into the new shroud by
following reversing steps 1 to 3. Refer to F
AN
W
IRING
D
IAGRAM
to ensure the fan is reconnected
properly.
F
AN
R
EMOVAL
:
Figure 25: Left Fan Shroud Assembly
