G
ENERAL
S
PECIFICATIONS
:
Table 1: 1200 KI & 1700 KI General Information.
Model
1200 Insert
1700 Insert
Width x Depth
27” x 22.5”
(686 mm x 572 mm)
27” x 27”
(686 mm x 686 mm)
Height of body
19” (483 mm) or 19.5” (495 mm)
Fire box size
(depth x width x height)
16.1” x 18.25” x 11.15”
(409 mm x 464 mm x 283 mm)
20.65” x 18.25” x 11.95”
(525 mm x 464 mm x 304 mm)
Capacity
1.85 feet3
(0.0526 meter3)
2.5 feet3 (0.0708 meter3)
* Approximate heating area
2200 feet2
(205 meter2)
3000 feet2
(280 meter2)
**E.P.A. output rating
11,479 to 34,196 BTU/hour
(3,361 to 10,013 watt)
9,425 to 31,780 BTU/hour
(2,760 to 9,306 watt)
*Duration on low burn
6 -10 hours
8 - 12 hours
Weight with packaging
335 lb (151.95 Kg)
390 lb (176.90 Kg)
E.P.A. Emissions
3.3 grams/hour
(0.116 oz/hour)
4.48 grams/hour
(0.158 oz/hour)
Surround Panels
Standard (width x height)
46” x 28.25” (1166 mm x 711 mm)
Oversized (width x height)
47.5” x 33” (1207 mm x 838 mm)
Rating Label Location
Side of Unit; Behind Right Shroud
10
Specifications
A
IR
C
ONTROL
:
The amount of combustion air going to the air wash and pilot is controlled by the air control rod located
on the right side of the unit. To increase your air pull the rod out, and to decrease push the rod in. All
Enviro wood stoves have a secondary air that fl ows through the stainless tubes at the top of the fi rebox
just below the baffl es.
Pull this control all the way out when fi rst starting the
stove. Once the fi re has been established you may
adjust this control to set the burn rate of the fi re. If
this damper is closed at fi rst start-up, the fi re will burn
very slowly and could soot the appliance.
When shutting down the stove, fully open the air
control. This allows the chimney temperatures to
remain as high as possible for as long as possible. Cold
chimney temperatures create creosote.
Figure 3: Air Control Rod.
Pull out - Increase
Push in - Decrease