ENVIRCO Control Console
Operation Manual
5.0. Control Console Operation
5.1.
Front Panel Features
•
Rotate to Select Unit or
Option Menu.
•
Push to enter Option Menu
Selected Address
Status of Selected Unit
Speed of Selected Unit
•
Rotate to Adjust Speed or
Option Settings
5.2.
Power On
At power-on, the Control Console displays a series of parameters including model
number on the three LED displays for about one second. The Control Console then
cycles all segments in display to confirm that the display is functional. Once display
cycling is complete, the Control Console then scans all addresses valid for that model
(10, 25 or 50.)
If no MAC 10 XL installed Envirco Phase Controllers or “Smart” MAC 10 units linked to
an Envirco DC Controller is detected, the Control Console repeats the scan sequence
until at least one unit is found.
Scan Address
Number of Units found
No Effect
No Effect
Figure 1: Front Panel Functions During Power-On
Page 8
