FLEX LS | USER MANUAL | 26
FIGURE 3-3. FLEX OUTDOOR COVERED LOCATION
Outside Location. For customer safety and convenience, all FLEX LS machines should to be installed in a
protected location. When not located inside a structure, a canopy of suitable construction must overhang
the machine on all sides to provide protection from the elements. The higher the canopy, the larger it
must be to provide adequate coverage for the FLEX LS. The overhang must extend out far enough to form
an angle of 30° from the base of the machine to the canopy on all sides.
For example, a canopy height of 2667mm (105”), would require an overhang of 1524mm (60”) as shown in
the figure below.
